發布于:2024-05-16 11:22:13  來源:http://www.tersatig.cn
全自動晾茬機是一種新型釀酒設備,具有速度快,效率高等特點??勺詣蛹铀⑾虑?、出料、攪拌均勻、散冷效果及其理想。每臺涼茬機都有接曲裝置組成,接曲裝置是涼茬機比較重要的裝置之一。接曲裝置位于涼茬機的底部,形成對下料口漏料的收集作用,從而節約物料,避免出現浪費的現象。
The fully automatic stubble drying machine is a new type of brewing equipment with the characteristics of fast speed and high efficiency. It can automatically add water, lower the curve, discharge the material, stir evenly, and achieve ideal cooling effect. Each cooling machine is composed of a bending device, which is one of the important devices of the cooling machine. The bending device is located at the bottom of the cooling stubble machine, forming a collection effect on the material leakage at the discharge port, thereby saving materials and avoiding waste.
1、在地上涼茬機的加曲料斗下料口正下方、處于涼茬機底部的傳動鏈條上方設置一接曲筐;
1. Install a curved basket directly below the discharge port of the curved material hopper of the ground cooling machine and above the transmission chain at the bottom of the cooling machine;
2、接曲筐的兩端分別固定在涼茬機支架的橫梁上;
2. The two ends of the connecting basket are respectively fixed on the crossbeam of the cooling machine bracket;
3、接曲筐為一端抬起的折型護板;
3. The bending basket is a folded protective plate that is lifted at one end;
4、且折型護板的抬起端設有調節螺栓用于調節接曲筐在橫梁上的折型高度;
4. The lifting end of the folding protective plate is equipped with an adjusting bolt to adjust the folding height of the connecting basket on the crossbeam;
5、以接曲筐形成對加曲料斗下料口中漏料的收集結構。
5. To form a collection structure for material leakage in the discharge port of the feeding hopper by connecting the curved basket.
全自動晾茬機與原始的打茬機相比,優勢更明顯,自動涼茬機是在原打茬機的基礎上研制出來的,原打茬機涼茬需要40-50分鐘,經過升級后的自動涼茬機僅需要20分鐘左右,大大縮短了時間,提高了效率,縮短了工作時間。
Compared with the original stubble cutting machine, the fully automatic stubble drying machine has more obvious advantages. The automatic stubble cooling machine is developed based on the original stubble cutting machine. The original stubble cutting machine takes 40-50 minutes to cool the stubble, while the upgraded automatic stubble cutting machine only takes about 20 minutes, greatly reducing time, improving efficiency, and shortening working time.
使用全自動晾茬機,涼茬網帶漏掉的茬子直接落入本機設計的不銹鋼箱體內,清理后完臥池利用,清理簡便杜絕了浪費與污染環境現象。安裝前,車間地面不需任何準備工作。還可根據需要,移動使用。
By using a fully automatic stubble drying machine, the leftover stubble from the cool stubble mesh belt can directly fall into the stainless steel box designed by this machine. After cleaning, it can be used in a horizontal pool, making cleaning simple and eliminating waste and environmental pollution. Before installation, the workshop floor does not require any preparation work. It can also be moved and used as needed.
此外我們在啟動全自動晾茬機之前,我們應當先檢查機器的電機是否正常,再去啟動設備。在檢查時,應同時使用吹風機對電機內的灰塵等污垢雜物清理干凈,還要測量接線是否合格,如果發現電機出現機械損傷或者火花灼痕應當立即進行必要的處理工作。
In addition, before starting the fully automatic stubble drying machine, we should first check whether the motor of the machine is normal before starting the equipment. During the inspection, a hair dryer should be used to clean the dust and other debris inside the motor, and the wiring should also be measured to ensure compliance. If mechanical damage or spark marks are found on the motor, necessary treatment work should be carried out immediately.
本文由 全自動涼茬機 為您精心提供,如想了解更多請點擊我們的網站:http://www.tersatig.cn,我們將會以的熱情為您解答!
This article is carefully provided by the fully automatic stubble cooler. If you want to learn more, please click on our website: http://www.tersatig.cn We will answer you with the greatest enthusiasm!